HMI Lighting

M18 – 1800W HMI (High Speed) – ARRI

iCode: 200023

Day Rate: $219
Week Rate: $657

The ARRI M18 1800W HMI Light is an open-face HMI fixture. You can power the M18 with a single 20 amps circuit and it can be used with the Honda EU7000is generator. With the appropriate speed ring, this light can be used with Chimera’s Quartz series to achieve a softer light. This light has dimming and focusing ability. The included High Speed Power Gems EM180P Ballast, allows you to shoot up to 3000 frames/sec.

Requires:

  • Stand with 1 1/8″ (2k, Junior) female receiver.

Includes:

  • 1 x M18 Fixture with 1800w bulb
  • 1 x Power Gems Ballast
  • 2 x 13″ Double Scrim (Full)
  • 1 x 13″ Single Scrim (Full)
  • 1 x Barn Doors
  • 1 x Spill Ring
  • 1 x Frosted Glass Diffuser
  • 2 x 50′ Header Cable
  • 1 x Spare Bulb per order

Specs:

  • Mounting: 2k Plug (a.k.a 1 1/8″ or Junior Pin)
  • CRI 90+ @ 6000K
  • Output Frequency option: 100Hz, 300Hz, 1000Hz, Silent mode
  • Power draws: 8.7A@230V, 16.7A@120V
  • Dimensions: 17.5 x 15.25 x 12.2″ (69.85 x 38.73 x x38.73 cm)
  • Weight: 23.1 lbs (10.5 kg)
  • IP23

Specified Operating Conditions:

  • Do not aim the light straight down.
  • Do not let hot lens, bulb or glass cover wet under any circumstances.
  • Hot re-strike time: 10 minutes.
  • Let light warm up for 5-10 minutes for optimal output and proper colour temperature.

Product Documents

Arri M18 Manual

Arri M18 Data Sheet

Power Gems ballast Troubleshooting

Power Gems EB180P Ballast Data Sheet