Stands + Booms

The MSE 40″ C-stand (aka century stand) has a 5/8″ Baby pin mount at the top, Mounted...

The MSE 20″ C-stand (aka Century stand) has fold in legs with turtle base to allow multiple...

The MSE 40″ grip arm with 2.5″ grip head. Grip head fits on a baby pin mount, and has...

Manfrotto 012B backlite stand with spigot and adjustable extension pole. The pole can also be detached...

For when you need to mount  low to the ground or a tight space. For light to medium light fixtures,...

This stand is designed for camera support such as Sliders or pipe based Dutti or Dana dollies. It...

This is the go to stand for camera support such as Sliders or pipe based Dutti or Dana dollies. It...

Avenger A5012 Lowboy Studio Roller Stand is ideal for fans or remote monitors on set. It has a 2 section...

This MSE Preemie stand (in Black) is ideal when a small stand is needed. Mounting point is a baby...

This is the go to wheeled monitor stand for supporting monitors on set (and a host of other things)....

This is a heavy 3 section rolling stand with folding legs. With no cross support bars, it can roll...

The baby junior wheeled stand has a 5/8 baby pin mount and 2 steel risers. It has a Maximum height...

This light weight medium sized stand is designed for packing flat to take less space, which makes...

This MSE 2K Low boy junior stand has a max height of 6′ 3″ (1.9m) with a 55lb (25kg) payload....

The Black Aluminum Manfrotto 008BU Stand w/Wheels is used as a wheeled stand for Superbooms. This...

A very solid wheeled stand with 2 section risers. The Mole Richardson 2K (female) stand is great to...

Hollywood combos are the replacement for a C-stand when used outside, and have a wider footprint and...

This stand is the most popular large wheeled stand, and is good for studio and location. Avenger A1045CS...

These Roller Stands are the smaller version of a Hi Hi Overhead Roller Stand, and are for supporting...

This is a smaller version of the Mombo Combo stand, but still one of the highest stands available....

These locking Matthews Combo Adapter Wheels fit on the Mini Mombo stands as well as the Hollywood...

This wide based roller stand is perfect for supporting backdrops, fabrics and large shooting backgrounds...

This is the highest stand available and extremely solid and durable, with an extra wide base for increased...

This is a heavy duty Wind-Up crank stand with a 66lb (30kg) payload and can lift to heights of 12′...

This Wind-Up crank stand with a 66lb ( 30kg ) payload and can...

This Crank stand is perfect for large LED screens or heavy payloads at a cost effective price. It...

This is a heavy duty crank stand has the lowest working height in the American Grip crank stand series...

This high payload crank stand can support a 220lb (100kg) maximum payload at a height of 11′...

This heavy duty crank stand is built for big payloads to reach extreme heights of up to 17′...

The industry standard for heavy booms and the largest in the Manfrotto range. The boom extends by...

The largest and heaviest of the MSE booms, with a 25lb counter weight, it minimum length is 5′...

The Manfrotto Superboom 025BS with head rotation and tilt capability comes with the Manfrotto Cine...

Just add pipe to make into a long or short suspended Boom to support fixtures at a variety of boom...

This steel Avenger D600 mini boom arm with sliding attachment extends from 3.8′ (1.1m) to 6.9′...

Designed to hold light to medium light fixtures, soft boxes and much more with no bending,  The MSE...

Wall to wall, the Manfrotto Autopole ( aka Polecat ) provide 3′ 2″ (1m) to 5′ 5″...

Floor to ceiling, or wall to wall these Autopoles provide 8′ 10″ (2.6m) of vertical or...

The single auto pole has a range from 6.9′ ( 2.1m ) – 12.2′ (3.7m ). Floor to ceiling,...

Manfrotto Autopole 5′ aluminum extension tube can be used to extend any of the Manfrotto Autopoles...