This Generator is good for sensitive electronic equipment such as HMI’s or Strobe packs, has electric start and supplies 125 / 250V.

• Electronic Fuel Injection and electric start
• Provides ultraclean electricity to power even the most sensitive electronic equipment.
• Receptacles: 2x 20A 125V, 1x 30A 125V Locking Plug and 1x 30A 125/250V Locking Plug
• 7000 Watts output at 120V or 240V (3pin and 4pin joy connectors can be rented seperatly)
• Super Quiet – 52dB(A) at 1/4 load, 60 dB(A) at rated load
• Large capacity fuel tank, 19.2 litres
• Eco-Throttle^™ standard – Runs up to 12.1 hours at ½ load on 19.2 litres of fuel
• Comes with one 20L (5.3 gallon) gas can.
• *NOTE* GENERATOR AND GAS CAN COME EMPTY.
• Will power an ARRI M40

Note: When using the generator to power strobe packs (Note Using a DIEF box may cause flicker of the modeling lights.)

• Optimal Setup: One Honda 7000W Generator can power x1 Pro 8a / Pro 10 @ full power (energy) & 100% power draw (speed) when plugged directly into the AC 120v outlets on the generator.
• One Honda 7000W Generator can power x 2 Pro 8a / Pro 10 @ full power (enegy) & 75% power draw (speed) when plugged directly into the AC 120v outlets on the generator.
• Not Recomended* One Honda 7000W Generator can power x 3 Pro 8a / Pro 10 @ full power (energy) & 50% power draw (speed) when plugged into a DIEF box through the 3 PIN 120v twist lock circuit on the generator.
  *modeling lights must be turned off when using a DIEF box or they will flicker and cause damage*Profoto recomends the below when using generator power ( However we have tested the above and it works)
  Each Pro 8 or Pro 10 requires one dedicated 6000W generator with clean power (consistent & stable signal, sine wave) @ full power (energy) & 100% power draw (speed)